C5 Corvette Wheel Torque Specs
C5 Corvette Wheel Torque Specs. Install the suspension knuckle to the lower control arm ball stud and torque to spec. Xmember mounting nuts (use new nuts) 110 n·m 81 lb ft.
1472 kg (3245 lbs) dimensions. 18 x 9.5 tire size: C5 corvette wheels (base specs) cast aluminum.
They Said They Torque The 7/16 Nuts To 90 Ft/Lbs And The 1/2 Nuts To 100 Ft/Lbs.
Brake caliper bleed screw 106 inch lbs. 1472 kg (3245 lbs) dimensions. In this section you will find the most common torque values for your c5 corvette.
Brake Caliper Inlet Fitting Bolt 37 Ft.
Curious about this question, i called lee's tire service in reedley california just now and asked them what they torque the nuts for aluminum wheels to. This unit develops 345 bhp (350 ps/257 kw) of power at 5600 rpm, and maximum torque of 475 n·m (350 lb·ft/48.4 kgm) at 4400 rpm. Rated at 345 horsepower, this engine provided drivers a significant power gain over the outgoing c4.
For Rear Wheel Bearing Replacement, Install The Axle Nut, And Tighten To 205 N·m (151 Lb Ft).
C5 corvette wheels (base specs) cast aluminum. Brake caliper guide pin bolt 23 ft. One being values can change.
2.73:1 (3.15 Optional) Final Drive Ratio:
Below, we have all the corvette c5 specs, from performance numbers to engine specs, options, colors and pricing. Power is delivered to the wheels by means of a 6 speed manual gearbox. Install the suspension knuckle to the lower control arm ball stud and torque to spec.
Lower Control Arm Ball Joint Stud Nut (1St Pass) 20 N·m 15 Lb Ft Brake Caliper Bleed Screw 12 N·m 106 Lb In.
Always refer to an approved source for all final torque values. As noted on the engine specs, the c5 with ls1 engine was outfitted with an automatic and manual transmission. C5 ls1 coupe and convertible:
Post a Comment for "C5 Corvette Wheel Torque Specs"